EasyManua.ls Logo

Starline A93 - Car Alarm Control in SLAVE Mode

Default Icon
124 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
StarLine A93, StarLine A63
106
Car alarm control in SLAVE mode
StarLine A93, A63 in SLAVE mode works automatically and does not
require any actions or devices, except factory devices for car control.
When arming the security system StarLine car alarm automatically
follow into «armed mode»
Arm
Before arming be sure that:
• ignition is o;
• hand break activated;
• door, hood, trunk closed.
Using factory key (or by other method) switch factory
security system into «armed mode».
Doors locked;
Siren and light signals, corresponding to arming procedure will
follow;*
Car alarm LED of StarLine car alarm will start to ash
car
In case of trunk, hood,doors are not properly closed or one
of the limit switch of door, trunk, hood failed (constantly
closed), car alarm will inform by 4 siren signals and 4 light
ashes (see. «Self diagnostic during arming», page. 36).
*
Sound and light conrmation signals depend on car design and StarLine car
alarm programming settings.

Table of Contents

Related product manuals