User’s manual
41
Two-step unlock engine
The function is programmed (Default mode is OFF).
If this function is
enabled, the engine will remain locked after each deactivation of the
alarm.
To unblock engine after disarming
please enter PIN-code (see page 82).
car
• After entering the last digit of PIN-code and switching ignition
OFF engine will be unblocked.
• Engine unblocking will be conrmed by
2 siren signals and 2 light ashing.
To activate two-step unlock engine mode, function 10 tab.
№1 must be programmed for option 2, 3 or 4. In this case,
after disarming the engine blocking will remain enabled.
To Next Page
Loading...
