User’s manual
65
version 4:
«latch» mode.
In the «latch» mode channel output is controled by remote
Control. The output status is changed to opposite after
every activation.
Type of additional equipment connected to the channel №1,
is specied during the installation of car alarm.
Additional CH 2 control
Versions of CH activation are dened by function 14 table
№1 (see page 112).
Command by remote is following:
version 1: 2 step door unlock.
remotecar
Disarm by pressing button 2 :
• 2 siren signals
• 2 light ashes,
• LED will turn o
• Only driver door unlocks
• 2 beeps
• Appear indication of
disarmed mode
To unlock other doors
press again button 2.