Starline A93 - Additional CH 9 Control

StarLine A93, StarLine A63
72
Additional CH 9 control
(light signals control relay,
connector 2)
Versions of CH 9 activation are dened by function 24 table
№1 (see page 113)
Channel activates automatically
Version 1:
light signals control
This version is intended for power control of light signals. Schematic
see installation manual.
Version 2:
FLEX programming
For this version, an activation method (by remote control or
automatically upon event happens) duration and the delay
of the output signal can be programmed. For more
information about exible programming see installation
manual. Activation of the channel occurs only automatically.
Version 3:
imitation of pressing the brake pedal
or the clutch.
Version 4:
DVR management
For details about using version 4 see the installation
instructions at www.starline.ru
Type of additional equipment connected to the channels
№9, is specied during the installation of car alarm.