Starline A63 - Additional CH 5 Control

StarLine A93, StarLine A63
68
Type of additional equipment connected to the channels
№3, is specied during the installation of car alarm.
Additional CH 5 control
Versions of CH 5 activation are dened by function 19 table
№1 (see page 112)
Version 1:
Starter blocking
This option is intended for starter blocking while the engine
is running, started remotely or automatically.
Detailed information see installation instructions.
Version 2:
FLEX programming
For this version, an activation method (by remote control or
automatically upon event happens) duration and the delay of
the output signal can be programmed. For more information
about exible programming see installation manual.
Version 3:
Central lock control «unlock»
(see installation manual).
Version 4:
«latch» mode.
In the «latch» mode channel output is controled by remote
control. The output status is changed to opposite after every
activation.
remotecar
• 3 light ashes.
• 3 beeps
To activate CH №2 by remote press
button 3 long (until melody appear),
then press button 2 shortly: