Starline A63 - Additional CH 6 Control

User’s manual
69
Additional CH 6 control
Versions of CH 6 activation are dened by function 20 table
№1 (see page 112)
Version 1:
Eberspacher control via digital bus.
Version 2:
FLEX programming
For this version, an activation method (by remote control or
automatically upon event happens) duration and the delay
of the output signal can be programmed. For more
information about exible programming see installation
manual.
remotecar
• 3 light ashes • 3 beeps.
To activate additional channel press button
4 on the remote control long (until melody
appear), then press button 2 shortly:
relay StarLine R3/R4 control
(see installation manual).
Version 3:
Version 4:
Webasto control via digital bus.
For information on setting up and connecting a stand-alone
heater to the StarLine system, see the installation
instructions on www.starline.ru.
Type of additional equipment connected to the channels
№6, is specied during the installation of car alarm.