Starline A63 - Immobilizer with PIN Code Identification; Shutdown and Authorization Algorithm; PIN Code Sequence Input Procedure

User’s manual
111
Immobilizer with validator
(PIN-code identification by using car
factory keys-buttons)
Below is description how to identify your self – inputing
code sequence. SLAVE mode is on, function №11 table №1
should be set for option 4
Shutdown and Authorization Algorithm
• doors locked;
• sound and light signals follow, corresponding to disarm
procedure;
• engine will be unblocked.
1
Using a factory key (or by other method)
turn factory security sysytem
into «disarmed mode»
car
2
To identify yourself input
code sequence PIN1 or PIN2.
Code sequence input:
1. Start identication procedure by start event (function №23
table №1);
2. Swith ON ignition;
3. Input PIN1 or PIN2 using car factory buttons to identify your
self (function №21 table №1;
• If code is correct, 1 light ash follow and you could start driving;
• If code sequence is failed, engine will be blocked and alarm
trigger signals start.
car