StarLine A93, StarLine A63
84
Engine heater control
If engine heater is connected to your car alarm (for example
Webasto), you could control it by remote control.
remote
Press button 1 long (until melody appear),
then press button 3 shortly:
• Appear icon
;
• Depending on programmed algorithm:
- Engine will start,
- Heater will be activated,
- Heater will be activated, and after
end of its work, engine will start.
There are possible modes when autonomous heater is activated to
warm the engine before engine starting.
Time of work and algorithm of heater activation are
programmed. To connect and program the settings, we
recommend contacting the car alarm installers.
To Next Page
Loading...
