User’s manual
95
If the engine does not start at the rst attempt, then car
alarm will take another 3 attempts to start. If after 4 attempts
the engine will not start, LCD remote control (provided that it
is located in the reception area) will display
.
Remote control will produce 4 beeps informing about the
end of engine start procedure. There will be 4 light ashes.
Remaining engine runtime is updated every minute (for
example: r10, r09, r08, r07 ...). 1 minute before the end of the
engine warm-up LCD shows r01 label and remote will make a
2 series of 4 beeps. After the warm-up time nishes engine
will be automatically shut down and 4 lights ashes will
follow. Remote control briey display r00, and give 4 beeps..
Remote engine shut down
Engine that was started remotely could be shut down by
remote control
Press button 1 long
and then button 4 short:
• 4 light ashes
• Engine will be
shut down
remotecar
• Melody plays
• Indication of engine
running dissapear