StarLine A93, StarLine A63
26
Working modes setting by cursor
method
Some car alarm modes possible to switch on by
using cursor method. ON status of any mode is
conrmed by backlight of corresponding icon.
This programming available during armed or disarmed status.
1
After you will hear 2 signals,
at bottom of LCD screen
rst left icon start to ash:
Press and hold button 3
until you hear 2 signals
(rst melody, and then short beep):
remote
2
Short press of buttons
2 (to the left) или 3, 4 (to the right)
move ashing cursor to icon