StarLine A93, StarLine A63
66
In order to implement the two-step unlocking, door activator
of the driver’s door and other doors activators should be
connected in accordance with the scheme two-step
unlocking. See installation instructions.
Version 2:
FLEX programming.
For this version, an activation method (by remote control or
automatically upon event happens) duration and the delay
of the output signal can be programmed. For more
information about exible programming see installation
instruction.
relay StarLine R3/R4 control
(see installation manual).
Version 3:
Version 4:
Ignition support
(this version is selected when in table
№2 function №1 «Remote engine starts»
is OFF)
Version 4 is intended for ignition support in turbo timer
mode, or when armed with engine running. Activation
happens automatically when the hand brake is ON during
ignition is also ON.
remotecar
To activate CH №2 by remote
(for version 2) press button 3 long
(until melody appear),
Then press button 1 short:
• 3 light ashes • 3 beeps.
To Next Page
Loading...
