Starline A63 - Hidden Anti-Hijack Activation Method; Steps 1-3: Initial Activation and Countdown

User’s manual
51
Hidden method of
switching anti-hijack on
Hidden anti-hijack switch mode can be applied in a situation
where other methods dicult or impossible.
Enabling occurs when you open the door (for example, if the
owner is forced to leave the car), after which the car alarm
operates automatically on a certain algorithm, consisting of
several steps.
Close car door. While engine is running
or ignition is ON
Press and hold Valet button more than 2s
Step 1:
After pressing valet button system turns in standby, in which
the car alarm is waiting for open the door.
Any indication of Standby mode is not available.
Standby mode may continue indenitely.
While all doors remain closed, it has no inuence on the car’s
function. When one of the doors is opened, automatically
activates the second step of anti-hijack algorithm.
Open one of the door
Step 2:
Any alarm signals are absent at this step, engine is not blocked.
Since opening the door starts 60 second countdown interval
after which alarm signals are enabled. Pressing remote control
button 3 can make sure you are in the second step of anti-
hijack mode. The icon of anti-hijack mode ashes on the LCD.
car
60 s after door opened
Step 3:
• Starts intermittent siren signals and light ashes that will last
for 30 s.