Starline A63 - Temperature-Based Automatic Engine Start; Activating and Setting Temperature Start Threshold

User’s manual
99
remote
3
Press button 1 long (untill sound
appear) or wait for auto exit
(after 4 s.) to memory
period of engine start:
• 2 beeps;
• LCD start to show icon
, conrming timer
engine start mode is active;
• After some seconds start the rst auto engine
start and warm-up. Duration of warming time
is dened by function 2
(see table №2 page 113).
Factory default - 10 minutes.
Temperature auto engine start
In an auto temperature engine start engine will be started
when external temperature sensor attached to the engine,
will detect temperature below set level. Temperature start
can be set within -3 °C to -27 °C step 3 °C and warming time
is determined by function 2 (table №2 page 113).
Car alarm monitors sensor readings since temperature auto engine
start function is activated. Minimum interval between repeated
starts, excluding warm-up time - 1 hour. After activating temperature
auto engine start number of engine startup is not limited.