Starline A63 - SLAVE Mode: Disarming and User Identification; Disarming the System and Identification Version 1

User’s manual
107
Disarm
Using factory key (or by other method) switch factory
security system into «disarmed mode».
• doors unlocked;
• sound and light signals will follow, corresponding to disarm
procedure;*
• StarLine car alarm will arm and engine will be unblocked
• User should pass identication.
car
If StarLine car alarm will produce 3 siren signals and 3 light
ashes, that conrms that in armed mode there was alarm
trigger.
If identication is failed, StarLine car alarm will again
block engine and alarm trigger signals start.
User identification
Method of engine unblocking (user identication) is dened
by function №11 (see page 111).
User identication method, and selection of tag search
event are dend during car alarm installation.
We recommend to consult installation center.
identication disabled
Version 1:
Engine unblocking will be done automatically after disarming. Any
additional operations and actions are not required.
*
Sound and light conrmat6ion signals depend on car design and StarLine car
alarm programming settings.