Starline A63 - User Identification by Tag (Version 2)

StarLine A93, StarLine A63
108
Version 2:
identication by tag
After disarming the central unit of StarLine car alarm need to nd host
tag, which should be within communication range. Search tags occurs
only on specic events:
disarming — search is started after factory security disarmed;
door open — after car security system disarmed by factory
remote control, search starts after car door opened;
ignition switched ON — after car security disarmed by factory
remote control, search starts after ignition was switched ON;
Start tag search event is dened by function №23, see page 113.
When tag is found main unit and tag communicate using dialoge
code.
If within 20 s tag is not found, search will be stopped sound
and light alarm signals will start, engine will be blocked. car
owner will be notied by SMS or phone call in case car alarm
has GSM module installed), consult installation center
If identication fails, the attempt can be repeated. To do this, after
the alarm signals nished start identication procedure again: arm
and disarm again, close and open the door, turn o and turn on the
ignition. signals You can interrupt alarm signals by pressing any
button on StarLine car alarm remote control.
* tag search duration time is dened by function №22, see page 112.