User’s manual
87
PIN code input - version 1
(emergency disarm)
1
INPUT 1 DIGIT. Switch ignition ON. Press service
button same time like rst PIN code digit
switch ignition OFF:
• If PIN code is 1-digit and input is correct , car alarm will be disarmed
and follow 2 light ashes
• If PINcode is more 2 or 3 digital, input next digit.
• Start alarm signals (if was armed by remote control),
• 4 light ashes (if was armed without remote control),
Open the door and keep opened:
2
INPUT 2 DIGIT. Switch ignition ON. Press service
button same time like second PIN code digit
switch ignition OFF:
3
INPUT 3 DIGIT. Switch ignition ON. Press service
button same time like third PIN code digit switch
ignition OFF:
• If PIN code is 3-digit and input is correct , car alarm will be
disarmed and follow 2 light ashes.
• If PIN code is 2-digit and input is correct , car alarm will be disarmed
and follow 2 light ashes
• If PINcode is more 3 digital, input next digit.
Important!!! during PIN code input duration between press of
service button and ignition on/os should be not less than 1 s and
not more than 5 s.