Starline A63 - PIN Code Input (Version 2: For Start;Stop Systems); 1, 2, and 3-Digit PIN Entry for Start;Stop Cars

StarLine A93, StarLine A63
88
PIN code input - version 2
(emergency disarm)
This version is more convinient for cars with start/stop push
buttons.
1
INPUT 1 DIGIT. Switch ignition ON. Press
service button same time like rst PIN code digit
Press and release pedal brake
(or activate and release hand brake):
• If PIN code is 1-digit and input is correct , car alarm will be
disarmed, If PINcode is 3 digital, input next digit.
• Start alarm signals or 4 light ashes (depending on arm)
Open the door and keep opened:
2
INPUT 2 DIGIT. Press service button same time like
second PIN code digit. Press and release pedal brake
(or activate and release hand brake):
• If PIN code is 2-digit and input is correct , car alarm will be disarmed,
If PINcode is 3 digital, input next digit.
3
INPUT 3 DIGIT. Press service button same time like
third PIN code digit. Press and release pedal brake (or
activate and release hand brake). Switch ignition OFF:
• If PIN code is 3-digit and input is correct , car alarm will be
disarmed.
Important!!! during PIN code input duration between press
of service button and pedal press should be not less than 1 s
and not more than 5 s.