User manual
Changing the emergency
disarm code
The initial emergency disarm code is indicated on the owner's plastic card or PIN envelope included
in the delivery set.
Plastic card
plasticcard1.png
Image not found or type unknown
PIN envelope
pinEnvelope.jpg
Image not found or type unknown
Changing the emergency disarm code via
SMS command
If the system includes a GSM module, send an SMS command0050XXXXYYYY, where
XXXX — the 4 digits of the current code;
YYYY — the 4 digits of the new code.
Changing the emergency disarm code via
the service button
To change the emergency disarmament code using the service button, you need to first enter the
current code and then the new code twice:
To change the code, you need to know the current emergency disarm code.
The emergency disarm code may contain any digits except zero.
To Next Page
Loading...
