Need help?Do you have a question about the Starr Instruments TGD-100 and is the answer not in the manual?
General| Brand | Starr Instruments |
|---|---|
| Model | TGD-100 |
| Category | Measuring Instruments |
| Language | English |
Lists detailed technical specifications of the ultrasonic thickness gauge, including range, accuracy, and power.
Steps for powering on the instrument and connecting the probe before taking measurements.
Guide on how to set and adjust the sound velocity parameter for accurate thickness readings.
Step-by-step process for performing thickness measurements on a material.
Details the procedure for performing a zero-point calibration using a standard test block.
Explains how to measure and set the sound velocity of a material using a known thickness.
How to configure high and low limits to trigger audible alarms for out-of-spec measurements.
Importance and selection criteria for using reference test pieces for calibration.
How to handle measurement errors when dealing with very thin materials.
Identifying and addressing abnormal thickness readings caused by defects.
Critical safety warning regarding physical damage and water exposure.
Guidance on addressing significant measurement errors by referring to relevant chapters.
Lists specific problems requiring professional support from the dealer or manufacturer.
States that the user should not attempt to disassemble or repair the high-tech instrument.
Step-by-step guide to reset the instrument to its default factory parameters.
To Next Page
