3.8.3 Memory Manage
Erase file: Clearing selected files
Erase all data: Clearing entire memory
Erase CAL data: Clearing calibrating data
4 Data logger operation
4.1 Logging readings into memory
The instrument divides the memory unit into 5 files. Each can save 100
measurement values. Before saving data, Please set file number first. If
you select the current file No., you can save the measurement directly by
pressing . The procedures for setting file No. are:
1) Use to move the cursor to the position shown in the following
figure:
2) Press , by pressing F1~F5 to display file No.s cyclically. You can exit by
pressing or conducting one measurement.
To Next Page
Loading...
