Need help?Do you have a question about the Starrett 436.1 and is the answer not in the manual?
General| Type | Outside Micrometer |
|---|---|
| Thimble Type | Ratchet |
| Material | Steel |
| Range | 0-1 inch |
| Graduations | 0.001 inch |
| Accuracy | ±0.0001 inch |
| Anvil Material | Steel |
| Spindle Material | Steel |
Describes the stationary and movable measuring surfaces of the micrometer.
Refers to the micrometric spindle used for adjustment and measurement.
The rotating part with fine graduations for reading measurements.
A mechanism providing uniform measuring pressure by slipping.
To Next Page
