Starrett 436.1 - Precautions When Using the Micrometer; Precautions When Measuring

PKG08768-UM436.1 9
ENGLISH
PRECAUTIONS WHEN USING THE MICROMETER
• Clean the measuring faces with a smooth cloth or chamois.
• Do not expose the micrometer to direct sunlight or extreme temperatures.
• Avoid mechanical shocks so as not damage the instrument.
• Do not disassemble the micrometer.
• Do not use compressed air on the micrometer; this can contaminate
the spindle.
• After using the micrometer, clean it and apply a thin coat of special
lubricant for instruments on the measuring faces and spindle to
avoid oxidation.
• Keep the micrometer, preferably, in its own original package.
PRECAUTIONS WHEN MEASURING
• Do not measure a rotating part; it is dangerous and causes the faces
in contact to wear.
• Do not apply excessive pressure when measuring. Use the ratchet or
thimble to obtain the appropriate measuring pressure.
• Parallax Error: Be careful when measuring to avoid a parallax error.
This error occurs when the observation point is not perpendicular to
the display. Take the reading perpendicularly to the thimble, sleeve
and vernier lines.
wrong
right
wrong