To Next PageTo Next PageWhat to do if there is no display on LCD Starrett Measuring Instruments?
If the LCD on your Starrett Measuring Instruments isn't displaying anything, there are a couple of things you can check. First, the battery might not be making good contact, so remove the battery cover and reseat the battery to ensure it's properly connected. Second, the battery might be low, in which case you should replace it.
How to fix five digits flashing on Starrett Measuring Instruments?
If your Starrett Measuring Instruments are showing five digits flashing simultaneously about once per second, it probably means the battery is low. Try replacing the battery.
What to do if display does not change when the slide is moved on Starrett 799A?
If the display on your Starrett Measuring Instruments isn't changing when you move the slide, it could be due to a problem with the electronic circuitry. To resolve this, remove the battery and reinstall it after waiting for 30 seconds.
Why are Starrett 799A less accurate than specified?
If your Starrett Measuring Instruments are less accurate than specified or you suspect an electronic system failure, it might be due to contamination on the sensor. Try cleaning the scale. If the problem continues after cleaning, further assistance is needed.
General| Series | 799A |
|---|---|
| Range (Dial Indicator) | 0-1 inch (0-25.4 mm) |
| Resolution | 0.0005"/0.01mm |
| Accuracy | ±0.001 inch (±0.02 mm) |
| Repeatability | 0.0005"/0.01mm |
| Graduations | 0.001 inch (0.02 mm) |
