14 PKG08800-UMEC799
ENGLISH
INSTALLATION / REPLACEMENT OF BATTERY
• First, remove the battery cover (9) using your thumb and
a slight pressure, carefully slide the battery cover to the
right. Place your finger into the small area at the top left
of the battery and lift the battery from the tool (Fig. 12).
• To install a new battery (Fig.13), place a new battery
plus (+) side up into the battery compartment cavity as
shown, and the battery will be held in place. Line up the
battery cover, and while lightly pressing down on it, push
the cover to the left until you hear a click. The tool will
display the main measurement display.
+
+
Fig. 12
Fig. 13
To Next Page
Loading...
