Startec S.R.L. Rain Speed 060 - Page 6

R
RR
A
AA
I
II
N
NN
0
00
6
66
0
00 Operating features
5
SPEED key -
- SHORT pressure
- Before the irrigation phase (unrolling) displays the programmed SPEED
expressed in metres/hour (m/h).
- During irrigation displays the instantaneous speed (im/h).
- In SPEED programming mode, single m/h decrease.
- In METRES unrolled pipe programming mode, single metre decrease.
- In IRRIGATION TIME programming mode, single minute time decrease.
- LONG pressure
- Enables programming the SPEED (the symbol * on the left side of the display
shows the beginning of the programming process).
- CONTINUOUS
pressure
- In SPEED programming mode, fast m/h decrease.
- In METRES programming mode, fast metre decrease.
- In IRRIGATION TIME programming mode, fast time decrease.
Note: the display is back-lighted at every key pressure and remains lighted for about 8 seconds.