StarTech.com NOTECONS02X - About the File Transfer Menu

Instruction manual
10
the frame rate is, the slower the video is replayed, which may mean that you
can see more details. Note: The Record, Loop Record, Make a Movie, and File
Transfer features are disabled during playback.
• Make a Movie. Select the Make a Movie option to create an .avi le from
previously recorded or loop-recorded les. This option is available regardless
of whether the NOTECONS02X is connected or not. To create an .avi le, click
the Movie button or click Video > Make Movie. Select a folder that contains
the record les made by NOTECONS02X. Select an output resolution for the
.avi le. If the recording was created using a resolution larger than the chosen
output resolution, the output video may look squashed. Note: The Record,
Loop Record, Playback, and File Transfer features are disabled when you select
the Make a Movie option.
About the File Transfer menu
File transfer works like a removable USB drive, but instead of a real drive, it creates a
disk image on the host computer that stores the les. Only one computer at a time
may access the image. Similar to what happens when you plug in a USB drive, when
the disk image is created, the target computer can read and write to the disk image
but the host computer can’t. The virtual USB drive can be used by any program or
operating system without requiring special drivers.
Disk images are dynamic. For example, if you create a 10 GB disk and copy a 1 MB le,
it uses only 1 MB plus overhead. Note: Large images are less ecient and may take up
more space when copying many small les.
Disk images that use the VHD format are compatible with Microsoft Windows and can
be mounted by Windows Explorer.
ISO CD-ROM and DVD images can also be used for read-only storage, meaning that
you can install an operating system without burning a real CD.
You can also drag-and-drop les onto the video window to automatically copy les
and create a temporary image.
To open the Disk Control screen, click the disk icon on the toolbar.
The following options are available in the File Transfer menu:
• Browse. Click to open an existing image le (supports dynamic VHD les and ISO
images).
• New. Click to create a new disk image (you will be prompted to specify your desired
size).
• Insert. Click to connect a disk image to a target computer. If there isn’t a disk image
loaded, a temporary one will be created. Temporary images are deleted when the
program is closed.
• Eject. Click to remove the disk image from the target computer.