Instruction manual
2
Introduction
About the rugged crash cart adapter
You must install the provided software on the laptop to be able to use the crash cart
adapter. You don’t need to make any changes to the server(s) being controlled.
You don’t need to start or shut down the software before you unplug the crash cart
adapter. You can connect or disconnect the adapter at any time.
Packaging contents
• 1 x rugged crash cart adapter
• 1 x USB A to mini-B cable
• 1 x USB software key
• 1 x quick start guide
System requirements
Laptop requirements
• USB 2.0-enabled laptop computer
• 20 MB of available hard drive space
• 24-bit capable display
• One of the following operating systems:
• Windows® 7 (32-bit and 64-bit)
• Windows 8 (32-bit and 64-bit)
• Windows 8.1 (32-bit and 64-bit)
• Windows Vista® (32-bit and 64-bit)
• Windows XP (32-bit and 64-bit)
• Windows Server® 2008 R2
• Windows Server 2003 (32-bit and 64-bit)
• Mac OS 10.6 and later (tested up to 10.10)
• Linux® 2.6.x to 3.13x (32-bit and 64-bit)
Server requirements
• VGA-enabled video card
• USB keyboard and mouse support
To Next Page
Loading...
