Instruction Manual
14
Try the following actions:
• Click Keyboard > Simulate Hotplug (reset).
The USB KVM switch isn’t working
Try the following actions:
• Instead of using a direct connection to a server, try to disable the USB mouse
emulation or force Relative Mouse Motion mode. Disabling the USB mouse
emulation simplies the USB prole presented to the KVM switch, and even the
most basic USB implementation should be able to understand and support the
keyboard and mouse in Relative Mouse Motion mode.
The toolbar is missing, the screen is always full screen, or the window is frozen
or too big or small
Try the following actions:
• To restore the window positions and toolbar state, click Toolbar > Window Layout.
To Next Page
Loading...
