EasyManua.ls Logo

Statesman STUDIO2B - Safety (General)

Statesman STUDIO2B
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
Safety
It is important to read this manual and take all safety measures recommended.
This appliance has been designed for domestic, non-professional use.
Check for any damage once unpacked. If there are any defects or damage,
do not use the appliance. Report the defect/damage to your supplier or
Statesman Service. Remove and dispose of all packaging immediately to prevent
any risk of harm to children.
This appliance must be installed and commissioned by a qualied person as
Statesman will not take any responsibility for damage caused by incorrect installation.
Before installing this appliance, make sure that the gas and electricity supplies are
compatible with the specication on the rating plate and the packaging.
The supply cable must never be changed by the customer. If it becomes damaged,
contact a qualied person to replace it.
Always switch the power supply o before any cleaning or maintenance is carried out.
After use, some parts of this appliance may remain hot for a long time.
Take care to avoid touching parts until the appliance has cooled.
Keep ammable materials away from the appliance.
Ensure that no cables of other appliances come into contact with this appliance,
especially hot parts.
Turn any control knobs to the o position when not being used.
When heating fats or oils, do not leave pans unattended as there is risk of re.
Keep children away from this appliance.
When using the grill, the oven door should be kept open.
Never use steam cleaners for cleaning the appliance.
Before opening the lid which covers the hotplate, check that there are no liquids on it.
Do not close the lid after use until the appliance has cooled down.
Make sure that the lid is open when using the appliance.

Related product manuals