Statesman STUDIO2B - Using the Hotplate; Using the Grill

7
Using the Hotplate
Using the Grill
IGNITION
Push in and turn the selected control knob anticlockwise to the ‘full on’ position (as
indicated by the ame symbols), whilst pressing the ignition button until the burner lights.
If you have the FULL FFD model (LEGACY 50GSLF), YOU WILL NEED TO HOLD THE
CONTROL KNOB IN FOR 5-10 SECONDS.
If the burner fails to light, do not attempt to re-light it for 1 minute.
SIMMERING
To achieve a simmer ame, light the burner on the full position and then slowly turn the
control knob anticlockwise to the small ame symbol. When trying to achieve a small
simmer ame, ensure burner remains lit before placing a pan over it.
PANS
For optimum safety and performance, please ensure pans are placed centrally over the
burner ame.
FOLD DOWN LID (if tted)
The lid is not intended to be used as a work surface as it becomes hot when the cooker is
in use and the surface will become damaged if rough or sharp items are put or used on it.
IMPORTANT - When grilling, the door must be open and the grill deector plate in
place. The deector plate will t beneath the control panel by locating it onto the
2 metal lugs.
IGNITING AND USING THE GRILL
Open the door fully, push in and turn the oven / grill control knob to the grill position
(as per symbol). Hold the control knob in and press the ignition button.
Keep the control knob pressed in for a further 5–10 seconds before slowly releasing.
If the burner fails to light, keep the oven door open and do not attempt to re-light it for
1 minute.
Allow 5 minutes for the grill burner ame to stabilize and reach the required temperature.
Adjust the grill pan on the runner positions to allow for dierent types of food.