EasyManua.ls Logo

Statesman STUDIO2B - Installation

Statesman STUDIO2B
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
Installation
IMPORTANT - Installation of this cooker must be carried out by qualied personnel.
This cooker may be tted ush to the base units.
Leave a gap of approximately 2mm minimum from any adjacent cupboard or appliance.
Any adjacent surface must be heat resistant to 50°C and if it is higher than the appliance
it must be a minimum of 110mm away from the appliance.
Any such adjacent cupboard less than 110mm away horizontally, must be at least 420mm
higher than the hotplate level.
No cupboard over the appliance should be closer than 700mm or cooker hood
closer than 650mm above hotplate.
CLEARANCES

Related product manuals