WWW.STEALTHCAM.COM
Toll Free 877-269-8490
SD Card size: 4GB or above, format using File System type “FAT32”.
Do not use File System type “NTFS” or “exFAT”, these formats are not
supported.
LCD DISPLAY
1. Locked icon (This represents that any programming is NOT allowed. All
setting buttons on front panel are disabled)
2. Unlocked icon (This represents camera power switch to SET mode,
allow customer to do programming by using setting buttons on front
panel)
3. PIR icon (This represents the camera’s triggering mode in PIR)
4. Time Lapse icon (This represents the camera is in Time Lapse mode)
5. Picture icon (This represents the camera is in still picture taking mode)
6. Video icon (This represents the camera is in video taking mode)
7. Burst mode icon (This represents the camera is in Burst mode setting –
# of pictures or length of AVI per PIR trigger)
To Next Page
Loading...
Need help?
General
