Memory Options
Your camera is equipped with 32MB built in flash memory. The camera
is also equipped with an expandable media card slot capable of
accepting up to 2GB SD card (sold separately). With no memory card
inserted into the slot, the camera will use the built in 32MB memory. If
an SD card is inserted into the slot, then the camera will bypass the
built in memory and utilize the SD memory. The front counter display
will show the number of images on the built in memory unless the
expansion card is inserted at which point the counter will only show the
number of images in the expansion card.
Inserting the SD card
Make sure camera is in the OFF position whenever adding or
removing memory.
Insert SD memory card into the SD card slot completely and in
the correct direction, as shown by the sticker located at the
side of the housing.
To remove the SD memory card, depress the SD card and pull
out the card gently.
To Next Page
Loading...
Need help?
General
