Stealth Cam STC-I850 User Manual

STC-I850
www.stealthcam.net Toll Free 877-269-8490
15
Programming the Stealth Cam
Switch the camera to the ON position. LCD screen will display the
camera status screen. Press the MENU button within 30 seconds to
enter programming mode.
If MENU button is not pressed within 30 seconds, camera will
automatically enter PIR detection mode.
Set the Resolution: The first program setting is resolution.
 The word RESOLUTION will be blinking.
 Press [OK] to choose the selection.
 Press the [UP] or [DN] button to select the desired resolution
(HIGH/LOW/BASE) and press [OK] to save and exit to
CAPTURING setting.
Set the Capturing sequence. Your Stealth Cam can be
programmed to shoot 1~9 pictures per triggering.
 The word CAMERA will be blinking.
 Press [OK] button and the number of burst modes will now
blink. Press the [UP] or [DN] button to select the desired burst
mode setting (number of pictures per triggering).

Stealth Cam STC-I850 Specifications

General

Brand	Stealth Cam
Model	STC-I850
Category	Security Camera
Language	English