the handheld TV screen does not flicker, you do not need to set
your TV out system. Proceed to the Thumbnail image section
below. If the handheld TV screen flickers, then you will need to
proceed to the next step to set up your TV out to PAL system.
Press the [MENU] button once. The word “ tu “ on the
camera’s internal screen will blink first. Press [OK] once and
now you’ll see “ tu – n “ blinking.
Press [DN] button to select TV out in PAL System (used in
most European and Asian countries). The word “tu – P” will
now be blinking. Press [OK] to confirm this setting.
Press [MENU] to exit. When you see the status screen appear,
power off the camera. Wait for 5 seconds and then power up
your camera again.
To Next Page
Loading...
Need help?
General
