10
|
ENGLISH
DRY IRONING
IMPORTANT: Make sure Continuous Steam Switch is in the
position to avoid water leakage.
1. Plug power cord into a convenient electrical outlet.
2. Turn Temperature Control Dial to desired ironing plate setting. The
desired setting should align with the Heating Indicator Light.
NOTE: It is recommended to start with lower temperatures rst,
as high settings designed for heavy materials can damage delicate
fabrics.
3. When Heating Indicator Light turns off, Ironing Plate is heated and
ready for use.
NOTE: During use, Heating Indicator Light will cycle on and off as
unit works to maintain a constant temperature. You may continue to
iron while Light cycles.
Once all ironing tasks are nished, immediately turn Temperature
Control Dial to OFF position. Be sure to set Continuous Steam Switch
to position to avoid water leakage. Place unit upright to cool the
ironing plate.
To Next Page
Loading...
