EasyManua.ls Logo

Steba DF 282 - Working Area; Before the First Use

Steba DF 282
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11
Keep the power supply cord away from hot parts.
Never leave the appliance unattended when operating.
Do not put anything on the appliance.
Do not leave the appliance outdoors or in a damp area.
Never immerse the appliance in water.
Do not operate the appliance if it is damaged (for example if it
felt down).
The manufacturer is not liable for damage occurred by using
the appliance in another way than described or if a mistake in
operating has been made.
To prevent injury, repairs such as replacing a damaged cord,
should only be carried out by customer service.
The appliance becomes very hot. Do not move the ap-
pliance until it has cooled down! The sides of the appli-
ance become hot. Do not touch during the usage.
Watch out for steam during cooking and when you open the
lid.
In order to avoid a hazard due to inadvertent resetting of the
thermal cutout,this appliance must not be supplied through an
external switching device,such as a timer,or connected to a cir-
cuit that is regularly switched on and off by the utility.
Working area:
Important: Never place the appliance on or next to a hot surface (e.g. stove). Always
use it on a stable, flat and temperature resisting surface. Always take care that no
inflammable objects are near to the appliance. Do not place directly under a kitchen
hood.
Before the first use:
The appliance should be wiped inside and outside with a damp cloth and dried. The
frying basket should be cleaned carefully with some hot water and some mild deter-
gent. Attention: Never immerse the appliance in any water!

Related product manuals