EasyManua.ls Logo

Steba DF - 90 - Working Area & Preparation; Safe Working Area; Preparation Before First Use

Steba DF - 90
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
Never pull at the cord set. Do not chafe it over edges or squeeze it.
Keep the power supply cord away from hot parts.
Never leave the appliance unattended when operating.
Do not put anything on the appliance.
Do not leave the appliance outdoors or in a damp area.
Never immerse the appliance in water.
Do not operate the appliance if it is damaged (for example if it
felt down).
The manufacturer is not liable for damage occurred by using
the appliance in another way than described or if a mistake in
operating has been made.
To prevent injury, repairs such as replacing a damaged cord,
should only be carried out by customer service.
Attention! Housing get hot. Danger of burns! Do
not place the appliance on a sensitive surface (e.g. pain-
ted furniture) and keep a distance of at least 70cm
to burnable materials.
Do not move the appliance until it has cooled down! The sides
of the appliance become hot. Do not touch during the usage.
Working area
Important: Never place the appliance on or next to a hot surface (e.g. stove). Always
use it on a stable, flat and temperature resisting surface. Always take care that no
inflammable objects are near to the appliance. Do not place directly under a kitchen
hood.
Before the first use:
The appliance should be wiped inside and outside with a damp cloth and dried. The
frying basket should be cleaned carefully with some hot water and some mild deter-
gent.
Attention: Never immerse the appliance in any water!

Related product manuals