What to do if my Steba IK 3500 Flex show error code E0?
If your Steba Cooker displays the error code 'E0', it means that the cookware you are using is either missing or not appropriate. To resolve this, check your cookware to ensure it is suitable for the appliance.
Why does my Steba IK 3500 Flex beep but not heat up?
If your Steba Cooker is beeping but not heating, it could be due to the pot being unsuitable for induction. Ensure the pot has a minimum diameter of 10cm and is designed for induction cookers. Try using suitable cookware to fix this issue.
What does error code E1 mean on Steba Cookers?
If your Steba Cooker shows error code 'E1', it indicates an internal overheat. To fix this, let the device cool down completely before restarting it.
What does error code E2 mean on my Steba IK 3500 Flex Cookers?
If your Steba Cooker displays the error code 'E2', it means that the pot's temperature is too high. Remove the pot from the device and allow it to cool down before restarting.
What does error code E3 mean on Steba IK 3500 Flex Cookers?
If your Steba Cooker is showing error code 'E3', it indicates an unusual voltage. Allow the device to cool down, then restart it.
What to do if Steba Cookers has no light after plugging in?
If your Steba Cooker has no light after plugging it in, it could be due to too many devices on one power cord. Check that the plug is correctly plugged in and also check the fuse.
General| Type | Induction Cooker |
|---|---|
| Power | 3500 W |
| Control | Touch Control |
| Cooking Zones | 2 |
| Power Levels | 10 |
| Temperature Range | 60°C - 240°C |
| Timer | Yes |
| Display | Digital |
| Voltage | 220-240 V |
| Frequency | 50/60 Hz |
| Material | Glass-Ceramic |
| Capacity | Not applicable |
To Next Page
