Steelcase 9000 Series User Manual

Page 1 of 7
939503251 Rev C
Series 9000
®
Desk Adapter Kit
(Used for Mounting 22-5/8" D Pedestals Under 30"D Desks)
®
If you have a problem, question, or request, call
your local dealer, or Steelcase Line 1 at
888.STEELCASE (888.783.3522)
for immediate action by people who want to help you.
(Outside the U.S.A., Canada, Mexico, Puerto Rico,
and the U.S. Virgin Islands, call: 1.616.247.2500)
Or visit our website: www.steelcase.com
©
2003 Steelcase Inc.
Grand Rapids, MI 49501
U.S.A.
Printed in U.S.A.
3/8" HEX
SOCKET
#2 PHILLIPS BIT
NOTE: For pedestals manufactured prior
to February 2004, use adapter kit 99239
per assembly direction 939501141.
Components
Tie Plate
#10 x 1/2" Self
Drilling Screw
(GQTFC)
Back Panel
Retainer
1/4-20 x 1/2"
Hex Head Screw
(853014765MP)
Adapter Bracket
For Package of all
Components above
(9U239)

Steelcase 9000 Series Specifications

General

Brand	Steelcase
Model	9000 Series
Category	Indoor Furnishing
Language	English

Summary

Removal of Drawers

Pull Drawer Forward

Initial step to pull the drawer out from the pedestal for removal.

Release Drawer Rails

Engage release tabs on both sides of the drawer rails to detach.

Remove Drawer Completely

Fully detach and remove the drawer unit from the pedestal.

Retract Drawer Rails

Push the drawer rails back into their retracted position within the pedestal.

Remove Remaining Drawers

Continue the process to remove all other drawers from the pedestal.

Remove Hanger Bracket

Detach the hanger bracket component from the pedestal.

Pedestal Installation

Attach Pedestal to Worksurface

Secure the pedestal to the worksurface using specified hex head screws and adapter brackets.

Replace End Panel Covers

Turn the desk assembly upright and re-install the end panel covers.

Level Worksurface

Adjust the end panel glides to ensure the worksurface is level.

Drawer Re-Assembly

Verify Drawer Rail Position

Confirm that the drawer rails are fully pushed back into the pedestal.

Extend Ball Cages

Pull the ball cages on the drawer rails forward to their accessible position.

Re-insert Drawer

Align the drawer's rails with the pedestal's rails and slide the drawer back in.