Steelcase 8500 Series User Manual

Page 1 of 5
939501228 Rev C
8500 Series Tables
®
If you have a problem, question, or request, call
your local dealer, or Steelcase Line 1 at
888.STEELCASE (888.783.3522)
for immediate action by people who want to help you.
(Outside the U.S.A., Canada, Mexico, Puerto Rico,
and the U.S. Virgin Islands, call: 1.616.247.2500)
Or visit our website: www.steelcase.com
©
2004 Steelcase Inc.
Grand Rapids, MI 49501
U.S.A.
Printed in U.S.A.
5/16” ALLEN
WRENCH
3/8" & 3/4"
SOCKETS
Boat-Shape Table
Round Table Square Table

Steelcase 8500 Series Specifications

General

Brand	Steelcase
Model	8500 Series
Category	Indoor Furnishing
Language	English

Summary

8500 Series Tables Overview

Table Base Assembly Instructions

Top Mounting Bracket Installation

Secure the top mounting bracket to the table using pilot holes and screws for stability.

Tie Rod and Base Mount Connection

Connect the tie rod to the base mount, ensuring proper thread engagement and jam nut tightness.

Upright Tube and Base Seating

Fit the upright tube over the tie rod and engage the base mount tabs into tube notches.

Final Base Tightening

Secure the upright tube and base mount by tightening the lock washer and nut on the tie rod.

Boat Table Top Assembly Steps

Joining Table Top Halves

Insert a spline to connect two top halves and align them for secure assembly.

Brace Attachment and Alignment

Center and secure braces across table halves with screws, adjusting for proper alignment.

Table Base Identification Chart