Active display elements in heating operating mode:
- The Heating indicator
is lit.
-
The Temperature 2 display
shows the current water temperature.
-
The Timer display
shows the time remaining for the automatic activation of the standby mode in
hours, if the timer is activated (see the "Operation" section).
-
The Temperature 1 display
shows the set water temperature.
- The SET/TEMP indicator
is lit.
Active display elements in cooling operating mode:
-
The Cooling indicator
is lit.
-
The Temperature 2 display
shows the set water temperature.
-
The Timer display
shows the time remaining for the automatic activation of the standby mode in
hours, if the timer is activated (see the "Operation" section).
- The Temperature 1 display
shows the current water temperature.
-
The SET/TEMP indicator
is lit.
Saving energy
To reduce energy consumption and related costs, you can take the following measures:
•
If you do not use the pool for a few days (e.g., on weekends), keep the current water
temperature approximately at the desired water temperature. The heat pump needs
time to heat up the pool water. If there is a large temperature difference between the
40
To Next Page
Loading...
