To Next PageTo Next PageWhat to do if timer LED doesn't flash and Steinbach SPS 175-1T Water Pump doesn't start?
If the timer LED on your Steinbach Water Pump doesn't flash and the pump fails to start, ensure the pump is properly connected to a power supply and check if the fuse has tripped.
Why does my Steinbach Water Pump emit unusual noises?
Unusual noises from your Steinbach Water Pump can occur if the pump is sucking in air. Inspect all hoses and gaskets for any leaks and ensure hose clamps are tightened. Also, ensure the water level in your pool sufficiently covers the suction line connection (approx. 2.5 - 5 cm or 1 to 2 inches). A clogged prefilter basket or suction line can also cause this issue; empty the prefilter basket and clean the suction line, if necessary.
The main unit for filtering pool water.
Catches large debris before it enters the pump.
Controls the pump's power.
Manages the pump's operating schedule.
Details the specific purpose and limitations of the device.
Defines symbols used in the manual and on the device.
Outlines general safety precautions for device operation.
Warnings and guidelines regarding electric shock hazards.
Specific safety measures for children and those with reduced capacities.
Warnings about suffocation risks from packaging materials.
Guidance on selecting an appropriate installation site for the pump.
Explains the operational role of the filter pump.
Details how the integrated timer manages pump cycles.
Specifies optimal water circulation durations.
Essential checks to ensure safe and correct operation.
Steps to activate the timer's memory backup function.
Step-by-step guide for assembling pump components.
Instructions for attaching hoses or pipes to the pump.
Guidance on linking the pump to the pool and filter system.
Procedure to remove air from the pump and system.
Instructions for starting and running the pump using the timer.
Procedure for exchanging the battery in the pump's timer.
Guidelines for cleaning the pump and its components.
Checks to perform before each use of the pump.
Steps for storing the pump safely during cold weather.
Addresses issues like air bubbles, unusual noises, and pump not starting.
Details model, power, flow rate, and other technical parameters.
List of replacement parts for the filter pump.
Manufacturer's statement of compliance with EU directives.
Instructions for recycling packaging materials.
Guidance on proper disposal of used electrical equipment.
General| Type | Submersible Pump |
|---|---|
| Max. immersion depth | 7 m |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Cable Length | 10 m |
