To Next PageTo Next PageWhat to do if my Steinbach Water Pump timer LED doesn't flash and the pump doesn't start?
If the timer LED on your Steinbach Water Pump isn't flashing and the pump won't start, the pump may not be getting power. Ensure the pump's power plug is securely connected to the power supply and check your fuse box to see if a fuse has tripped.
Why does my Steinbach SPS 75-1T Water Pump make unusual noises?
Unusual noises from your Steinbach Water Pump are often due to the pump sucking in air. Inspect hoses and gaskets for any leaks and ensure hose clamps are tightened. Also, check that the water level in your pool isn't too low and that the prefilter basket (if your pump has one) is clean. A clogged or misplaced suction line could also be the culprit, so inspect and clean it.
Instructions are part of the device and contain important information for start-up and operation.
Device is for pumping pool water with specific temperature and salt concentration limits for private use.
Explains symbols used in the operating instructions, on the device, or packaging.
Provides warnings and instructions regarding electric shock and handling.
Addresses dangers to children and persons with reduced capacities, and risks from insufficient qualification.
Warns about suffocation risk from packaging materials and how to check contents.
Requirements for selecting a suitable location for the pump, considering protection and stability.
Explains the function of the filter pump as moving pool water to the filter system.
Explains how the integrated timer starts and stops the pump automatically.
Guidance on how often pool water should be circulated per day for optimal filtering.
Lists checks to perform before initial start-up of the device.
Steps to activate the timer's memory backup function by inserting the battery.
Instructions on assembling the pump by attaching prefilter cover and hose adapters.
Guidance on connecting pool hoses to the pump or filter vessel using hose clamps.
Steps for connecting the suction and pressure lines between the pool, pump, and filter vessel.
Procedure to remove air from the pump and system before operation.
Steps for operating the pump using the timer, including setting running times.
Instructions on how to replace the battery in the timer.
Guidance on cleaning the device using mild cleaners and a lint-free cloth.
Detailed steps for cleaning the pump and its components.
Checklist of items to verify before each use of the pump.
Instructions for storing the pump during winter to prevent frost damage.
Specifications for the SPS 50-1T model, including flow rate and power.
Specifications for the SPS 75-1T model, including flow rate and power.
Specifications for the SPS 100-1T model, including flow rate and power.
Instructions for sorting and disposing of packaging materials.
Guidance on proper disposal of the used appliance and batteries.
General| Power | 800 W |
|---|---|
| Max. immersion depth | 7 m |
| Voltage | 230 V |
| Frequency | 50 Hz |
| Type | Submersible pump |
| Max. flow rate | 15 m³/h |
| Max. delivery height | 36 m |
| Max Flow Rate | 15 m³/h |
| Max Head | 36 m |
