STEINEL IS 3360 - IS 3180 reach specifications; Function and operation; Factory settings and twilight adjustment; Teach mode

30
IS3180 (Fig� 5�10)
Note:
The factory setting is 20 m
• Fit sensor and load module together and screw into place.
• Switch ON power supply�
• Set functions. (➔ "6� Function")
• Fit designer trim.
6� Function / operation
Factory settings
Twilight level: 1000 lux
Time setting: 5 s
Twilight setting (Fig� 6�1)
The chosen sensor response threshold is infinitely adjustable from approx. 2-1000lux.
Control dial
means twilight mode at approx. 2lux.
Control dial means daylight operation / independent of ambient light level.
Teach mode
The control must be set to
at the level of light at which you want the sensor to
respond to movement from now on. The level of ambient brightness measured in this
way will be saved after 10seconds. The load is deactivated during this period.
Mounting
height
20 m lens 8 m lens
Setting level tangential radial Setting level tangential radial
1.5 m 8 5 m 2.5 m 4 3 m 2.0 m
– 6 m 2.5 m – 5 m 2.5 m
– 7 m 3.0 m – 6 m 3.0 m
– 8 m 3.0 m – 7 m 3.0 m
20 12 m 4.5 m 8 9 m 3.5 m
2.0 m 8 5 m 2.5 m 4 4 m 3.0 m
– 6 m 3.0 m – 5 m 3.0 m
– 7 m 3.5 m – 6 m 3.0 m
– 10 m 4.0 m – 8 m 3.0 m
20 20 m 4.5 m 8 8 m 3.5 m
2.5 m 8 6 m 3.0 m 4 5 m 3.0 m
– 8 m 4.0 m – 7 m 3.5 m
– 10 m 5.0 m – 8 m 3.5 m
– 13 m 5.0 m – 9 m 4.0 m
20 20 m 4.0 m 8 10 m 3.5 m
3.0 m 8 8 m 4.0 m 4 5 m 3.0 m
– 9 m 4.5 m – 6 m 3.0 m
– 12 m 5.0 m – 8 m 4.0 m
– 17 m 4.0 m – 10 m 4.5 m
20 20 m 4.0 m 8 13 m 5.5 m