Need help?Do you have a question about the STEINEL HPD2 IP and is the answer not in the manual?
General| Category | Accessories |
|---|---|
| Application place | Indoor |
| Detection angle | 360 ° |
| IP rating | IP20 |
| Protection class | II |
| Weight | 150 g |
| Type | Presence detector |
| Detection range | 5 m |
| Power supply | 230 V AC, 50 Hz |
Lists commands in JSON format for accessing sensor status, firmware version, and device parameters.
Connects the PoE adapter to the power supply for device operation.
Connects the HPD2 and PC to the PoE adapter and network switch for system integration.
Details initial login IP address and default admin password for device access and configuration.
Instructions for changing admin and camera access passwords post-initial login for enhanced security.
Adjust detection sensitivity, anti-flicker, temperature units, and image brightness levels.
Details methods for restarting the sensor or resetting all settings to factory defaults.
Enables or disables night mode and high-resolution detection for improved image capture.
Guide to searching for new firmware files and initiating the update process for the sensor.
Press 'Detail' to define up to 10 recognition areas within the sensor's field of view.
Sections must be defined for detection; areas to exclude are non-detection zones using corner points.
Interface for adding and managing up to 10 distinct detection zones for occupancy monitoring.
To Next Page
