STEINEL IS 3360 - Unwanted activation and LED indicators

36
Malfunction Cause Remedy
Sensor responds
when it should not
n Wind moving trees
and bushes in the
detection zone
n Cars in the street are
being detected
n Sunlight is shining on
the lens
n Sudden temperature
changes due to weather
(wind, rain, snow) or air
expelled from fans,
open windows
n Dazzle guard active
n Sensor near Wi-Fi or
other wireless commu-
nication sources
n Change detection zone
n Change detection zone
n Mount sensor
in a sheltered place or
change detection zone
n Change detection zone,
mount in a different
place
n Switch OFF manually
at pushbutton/switch
n No movement detected
within the selected
stay-ON time + 60 sec
(dazzle guard)
n Install at least 2 m away
from the wireless com-
munication source
LED flashes once every 15 s
n Load connected
is too high
n Reduce load or use
contactor