18
INSTALLATION continued
SPILL RECOVERY
Mount the pump vertically and use the spill recovery to drain chemical back to the tank in
the event of tube failure. This will help prevent chemical from collecting in the tube housing
and reduces spillage on the floor.
The pump motor is ventilated and water intrusion can cause motor damage. A rain roof is
recommended for outdoor and wet environments.
SPILL RECOVERY IS NOT RECOMMENDED FOR ACID APPLICATIONS.
Strainer with Weight
Spill Recovery
3"
www.stenner.com
Tube drains solution
back to tank.
Punch out one of two hole plugs
using a 7/32" punch or drill.
Use section of 1/4"
suction/discharge tubing
and insert in hole.
To Next Page
Loading...
