Steren COM-280 - Printing in Windows 95;98;ME; Installing LPR Client for TCP;IP Printing

PRINTING IN WINDOWS 95/98/ME
The Print Server can provide print services to TCP/IP networks
using the lpr/lpd network printing protocol. Most UNIX systems
are capable of supporting lpd, as is Windows NT/2000.
This LPR for TCP/IP Printing client gives Windows 95/98/Me
workstations the ability to print using the lpr/lpd printing
protocol. Though it is possible to print to Print Servers from
Windows 95/98/Me, this capability is useful if primarily
administer your network from UNIX systems, or if you want to
print from workstations that are only accessible through IP
routing.
INSTALLING THE LPR FOR TCP/IP PRINTING
CLIENT
Before your Windows 95/98/Me workstation can print using the
lpr protocol, you will need to install the client program, as follows:
1. Make sure that you have installed the TCP/IP protocol, and
have properly confi gured the Windows 95/98/Me TCP/IP
settings. You can install the protocol from the Network control
panel if necessary.
2. From the Start menu, choose the Settings submenu, then the
Control Panel item within it. Windows will display the Control
Panel folder.
3. Double-click on the Network icon in the Control Panel folder.
4. Click on the Add... button on the Confi guration tab.
5. Windows will ask for the type of component to add. Select
Client and click Add... to continue.
ENGLISH
ENGLISH-18