2. SAFETY INSTRUCTIONS
265
EN
Assembly and Start
dna draug tnemhcatta gnittuc ,rab eldnah eht fo noitallatsni laitini eht roF •
cutting attachment please refer to the assembly manual (p.5 - p.10). The metal
blade has sharp edges. Use the protective gloves when installing or removing
the blade.
reveN !dnemmocer ew sdraug eht htiw stnemhcatta gnittuc esu ylnO • use other
cutting attachment
which are not recommended, if used it’s likely to lead to mechanical hazards
to operator.
ytefas s’enihcam ehT .tnempiuqe ytefas ytluaf htiw enihcam a esu reveN •
equipment must be checked and maintained before each use:
elttorht eht fo noitarepo latnedicca tneverp ot dengised si tuo-kcol elttorht ehT–
control. When you press the lock-out (i.e. when you grasp the handle) it releases
the throttle trigger. When you release the handle, the throttle control and the
throttle lock-out both move back to their original positions. This arrangement
means that the throttle control is automatically locked at the idle setting.
erus ekam .enigne eht pots ot hctiw
s enigne eht fo edis ”POTS“ eht nwod sserP–
the engine stops when you move the engine switch to the stop setting.
sdrawot nworht gnieb morf stcejbo esool tneverp ot dednetni si draug sihT–
the operator. The guard also protects the operator from accidental contact with
the cutting attachment. Check that the guard is undamaged and not cracked.
Replace the guard if it has been exposed to impact or is cracked. Always use the
fo aera kcolc’o 3 dna kcolc’o 21 eht nehw rucco nac taht raer ro thgir s’rotarepo
a rotating blade comes in contact with a solid rigid object
like a tree, rock, bush
or wall. The rapid counter clockwise rotation of the blade may be stopped or
slowed, and the cutting attachment may be thrown to the right or to the rear.
This kick-back (blade-thrust) may cause loss of control of the power tool and
may result in serious or fatal injury to the operator or bystanders. To reduce the
risk of injury, extreme caution should be used when cutting with the shaded
area of any rigid blade.
esU .esaeler kciuq evitcefed a htiw ssenrah a esu reveN • the quick release
requires you to free yourself from the machine or harness.
To Next Page
Loading...
Need help?
General
